HTC Reveals Full Vive Focus 3 Teardown Ahead of June 27th Release – Road to VR

In preparation for its June 27th ship date, HTC launched a full teardown of its newest enterprise-focused standalone, Vive Focus three.

Shen Ye, HTC Vive Head of World Hardware Merchandise, takes us via the entire dismantling course of, one thing that he warns shouldn’t be tried at residence since it can undoubtedly invalidate your guarantee—not one thing you wish to do with the $1,300 headset and controllers.

“We use extremely exact machines to calibrate the headsets, and there’s no solution to replicate the precision by hand alone,” Ye cautions earlier than heading into the teardown correct. The teardown is of a pre-production unit, which is alleged to look barely completely different on the skin by way of end, however is “just about the identical on the within,” Ye says.

We’ve linked the complete teardown under, but in addition included a written recap if you happen to’re unable to look at the video.

Ye first explains a bit about Vive Focus three’s specs, together with its headstrap design, built-in audio answer, and hot-swappable battery, which is mounted on the again of the headstrap.

Like all batteries, it’s unwise to dismantle any additional than popping it out of the machine itself, Ye warns. The 26.6Wh battery incorporates a curved design to raised match contained in the again a part of the headstrap, and options USB-C quick charging, which might cost from zero – 50% in 30 minutes, Ye says. Owing to its lithium polymer gel design, it’s stated to be extra leak and swelling resistant than conventional lithium polymer liquid cells.

HTC Reveals Full Vive Focus three Teardown Forward of June 27th Launch – Street to VR 23Picture courtesy HTC

Ye additionally goes via a couple of notable options, most of which could be summarized within the headset’s spec sheet. If you’d like a deeper dive into every element, try our full breakdown right here.

Vive Focus three Specs Decision 2,448 x 2,448 (6.0MP) per-eye, LCD (2x) Refresh Price 90Hz Lenses Twin-element Fresnel Discipline-of-view 120° horizontal Optical Changes IPD IPD Adjustment Vary 57–72mm Processor Snapdragon XR2 RAM 8GB Storage 128GB (expandable by way of MicroSD to 2TB) Connectors USB-C (2x) Battery Life 2 hours Monitoring Quad on-board digicam (no exterior beacons) Controllers Vive Focus three controllers, rechargeable battery Audio In-headstrap audio system, three.5mm aux output Microphone Twin microphone Go-through Cameras Sure

With precision screwdriver in hand, we get the primary glimpse below the plastic headstrap, which hides the facility cables operating to the back-mounted battery, the in-strap audio system, and the audio cables that join them to the mainboard sitting on the entrance of the headset. That white ring on the headstrap swivel is a particular polymer that’s designed for power, Ye explains.

HTC Reveals Full Vive Focus three Teardown Forward of June 27th Launch – Street to VR 24Picture courtesy HTC

Subsequent up, Ye detaches the faceplate by eradicating a couple of screws from the lens-side of the headset and a few hidden contained in the USB-C accent port, which is held shut with magnets. Right here, we get our first have a look at the mainboard, 15W copper cooling warmth pipe, brushless fan, and the lattice of ribbon cables connecting all the pieces collectively.

Ye doesn’t point out precisely what number of tiny screws are concerned in these subsequent dismantling steps, however it’s most likely rather a lot, as the warmth pipe and fan have to be nicely hooked up to the Qualcomm Snapdragon XR-2 chipset.

HTC Reveals Full Vive Focus three Teardown Forward of June 27th Launch – Street to VR 25Picture courtesy HTC

After eradicating some ribbon cables, the housing and internals could be separated. A couple of extra connectors and the principle PCB could be faraway from the magnesium alloy body too, one thing that’s “20% lighter and 500% stronger than conventional plastics,” Ye says.

The magnesium alloy body can also be helpful insofar it may possibly dissipate warmth from the 4 outward-facing digicam sensors, which deal with each controller monitoring and positional room-scale monitoring for Vive Focus three.

HTC Reveals Full Vive Focus three Teardown Forward of June 27th Launch – Street to VR 26Picture courtesy HTC

Subsequent up is the optics and shows, that are sandwiched collectively. These little arms within the middle that includes small tooth are used to regulate the shows for every customers’ particular person interpupillary distance (IPD). It’s a dual-element lens design, Ye tells us, which permits for a 120-degree horizontal subject of view (FOV).

HTC Reveals Full Vive Focus three Teardown Forward of June 27th Launch – Street to VR 27Picture courtesy HTC

Flipping the entire meeting round, and Ye then detaches the show from the lens housing, revealing the two,448 x 2,448 LCD.

HTC Reveals Full Vive Focus three Teardown Forward of June 27th Launch – Street to VR 28Picture courtesy HTC

That’s the extent of the headset teardown; Ye strikes on to take aside the Vive Focus three movement controller. Popping off the deal with’s outer plastic and prime with a spudger, we get the primary glimpse on the controller’s capacitive sensors, which sense when your finger is resting on a button or space of the controller.

HTC Reveals Full Vive Focus three Teardown Forward of June 27th Launch – Street to VR 29Picture courtesy HTC

Extra screws, extra connectors, and the highest monitoring ring could be faraway from the physique and bisected, revealing the interior IR LED markers that the headset’s digicam sensors use to trace the controller. There’s 5 on the within of the ring as nicely, he says, which was included to enhance monitoring efficiency.

HTC Reveals Full Vive Focus three Teardown Forward of June 27th Launch – Street to VR 30Picture courtesy HTC

Again on the controller’s deal with, a stiff pull is used to pop off the joystick. A number of screws maintain the higher meeting, which is hooked up to the set off button. Because it goes, all the pieces appears to return off with the removing of solely few screws.

Right here’s the complete exploded view of the controller, exhibiting (amongst all the pieces else) the mainboard and battery housing.

HTC Reveals Full Vive Focus three Teardown Forward of June 27th Launch – Street to VR 31Picture courtesy HTC

And that’s it for the Vive Focus three teardown. Once more, if you’d like a deeper dive on the specs, software program, enterprise machine administration, app retailer, and extra, click on right here to be taught extra.

Go to our Digital Actuality Store

Go to our sponsor Video 360 Digicam

Credit score : Supply Hyperlink